Akom's Tech Ruminations

Various tech outbursts - code and solutions to practical problems

Low Tech Hacks Replacing Dishwasher Circulation Pump Bearings without buying a whole new unit

Posted by Admin • Friday, April 26. 2019 • Category: Low Tech Hacks

I have a DW80j3020us/AA Samsung dishwasher. It has been producing a loud noise for some time, and the noise kept getting worse. It was a matter of time before it either seized or melted the motor. The reason I know that the problem is with the circulation pump is that the noise is only audible while it's washing (circulating), not while draining or filling. Clearly the problem could be the motor (bearings) or some part of the impeller/grinder (less likely).

Samsung Dishwasher

My options were:

  1. New dishwasher
  2. New Circulation Pump motor DD31-00008A ($150)
  3. Try to change the bearings (I've found nothing online about anyone doing this)

 

You can find lots of videos online on how to properly replace the circulation pump motor/assembly. I followed the guides for removing the internal components down to the food chopper, since the chopper is on the motor shaft. This takes about 20 minutes. After that, it was easy - all I had to do was pull the bottom cover off and remove 4 screws to get the motor out. Then a magical thing happened.

Continue reading "Replacing Dishwasher Circulation Pump Bearings without buying a whole new unit"